Crushing-Conveying

The new single toggle primary jaw crushers have been manufactured to be reliable in even the most difficult working conditions. Extensive researches have resulted in designin a new crushing chamber with a slight catching angle.

	Type	Feed Opening (mm)	Flywheel Diameter Ø (mm)	Flywheel Rotation (RPM)	Drive (kw)	Weight (kg)
	FRN1600	1600X1350	2400	170 - 190	250- 315	90000
	FRN1400	1400X1250	1900	180 - 220	160 - 200	53000
	FRN1250	1250X1050	1600	180 - 220	132 - 160	46500
	FRN1100	1100X900	1400	200 - 240	75 - 90	30000
	FRN900	900X800	1300	230 - 260	55 - 75	19000
	FRN750	750X550	1200	240 - 270	30 - 37	11000

Primary impact crushers are succesfully used to crush non–abrasive materials with high crushing ratio and high productivity.

	Type	Feed Opening (mm)	Capacity (t/h)	Rotor Speed (Rpm)	Drive (kw)	Weight (kg)
	RUP65	650X700	80-145	545	75-90	8300
	RUP85	850X1000	120-250	545	110-132	15000
	RUP 110	1100X1000	160-320	380-450	160-200	28000
	RUP130	1300X1450	280-510	380-450	250-400	35000
	RUP170	1700X1450	580-790	380-450	355-500	58000
	RUP200	2000X1450	740-1020	380-450	500-900	85000

DAL RDS–RDM crushers are high capacity productive machineries designed for quarrying solutions.

RDM – RDS Properties
	Speciality	Feed Size (mm) (Limestone)	Feed Size (mm) (Basalt-Granite)	Capacity (t/h)	Drive (kw)	Rotor Speed (rpm)	Weight (kg)
	RDM65	10–100	3–100	40–80	75–160	600–1100	9000
	RDM65S	5–150	5–120	80–150	160–250	500–800	15000
	RDS85	5–350	5–250	150–300	160–250	350–600	19000
	RDM130	10–100	3–100	80–150	160–315	600–1100	13000
	RDM130S	5–150	5–120	200–355	250–355	500–800	22000
	RDS170	5–350	5–250	250–500	250-355	350–600	29000
	RDS170S	5–350	5–250	300–750	355–500	350–600	34000

These machines are used to feed primary jaw or impact crushers.The single or double grizzly sections allow to rough out the material, and separate the fine products from the pieces remaining over the grizzly which ensures the capacity increase of the crushers.

Conveyor rubber in EP 125 or EP 160 quality, with 4 – 5 plies of chord, 10 – 12 mm thickness, endless and with certificate.

	Type	Belt Size (mt)	Drive (Kw)	Belt Speed (mpm)	Belt Angle (°)
	500	5,0- 50	5,5 – 22	1,1 – 24	0 – 18
	600	5,0- 50	5,5 – 37	1,1 – 24	0 – 18
	700	5,0- 50	5,5 – 75	1,1 – 24	0 – 18
	800	5,0- 50	5,5 – 75	1,1 – 24	0 – 18
	1000	5,0- 90	7,5 – 75	1,1 – 24	0 – 18
	1200	5,0- 90	7,5 – 75	1,1 – 24	0 – 18
	1400	5,0- 90	11 – 132	1,1 – 24	0 – 18
	1600	5,0- 90	11 – 250	1,1 – 24	0 – 18

RAL serie of apron feeders of DAL, are used for extra heavy duty applications in wide ranges. These machines are designed to feed primary jaw and impact crushers.

	Type	Dimensions (mmxmm)	Drive (Kw)	Capacity (tph)	Speed (mpm)
	RAL800	800x6000	4	100-150	3,2 - 8,2
	RAL1000	1000x6000	5,5	150-320	3,2 – 8,2
	RAL1200	1200x8000	11	210-590	3,8 – 7,5
	RAL1500	1500x12000	22	270-850	2,5 – 6,3
	RAL2000	2000x12000	45	340-1200	2,5 – 6,3

RAL serie of push feeders of DAL, are used for extra heavy duty applications wide ranges.Proportional hydraulic system lets precise control for feeding.

	Type	Table Size (mmxmm)	Drive (Kw)	Capacity (tph)	Stroke (mpm)
	VAG 800x2000	800X2000	3	50-180	50 – 250
	VAG 1000X4000	1000X4000	7,5	100-210	50 – 250
	VAG 1200X5000	1200X4000	15	170-350	100- 500
	VAG 1500X6000	1500X5000	22	230-550	100- 500

The movements is operated by a vibrator unit with agjustable eccentric counter weights placed on and outside the screen box.The steel alloy shaft runs on two self-aligning special roller bearings for vibrating operations.

	Type	Level	Size of Sieve (mm)	Feed size (d/d)	Drive (kw)	Weight (kg)	Rotor Speed (r.p.m)
	DVE12302	2	1250X3500	150	7	2240	800-1000
	DVE12303	3	1250X3500	150	7	2760	800-1000
	DVE12304	4	1250X3500	150	11	3130	800-1000
	DVE15402	2	1500X4500	150	15	4200	800-1000
	DVE15403	3	1500X4500	150	15	4910	800-1000
	DVE15404	4	1500X4500	150	15	5920	800-1000
	DVE18502	2	1800X5000	150	15	5870	800-1000
	DVE18503	3	1800X5000	150	18	7060	800-1000
	DVE18504	4	1600X5000	150	18	8290	800-1000
	DVE18602	2	1800X6000	150	18	11680	800-1000
	DVE18603	3	1800X6000	150	22	16050	800-1000
	DVE18604	4	1800X6000	150	22	18540	800-1000
	DVE20602	2	2000X6000	150	22	11680	800-1000
	DVE20603	3	2000X6000	150	30	16050	800-1000
	DVE20604	4	2000X6000	150	30	18540	800-1000
	DVE24602	2	2400X6000	150	30	11680	800-1000
	DVE24603	3	2400X6000	150	37	16050	800-1000
	DVE24604	4	2400X6000	150	37	18540	800-1000

DAL Grizzly Screens DGE, are designed for screening applications with high capacity, high screening efficiency, ease of maintenance and mesh replacement and quality manufacturing and workmanskip.

	Type	Screen Size (mmxmm)	Drive (kw)	Weight (kg)
	DGE 1036	1000X2500	7,5	4500
	DGE 1536	1500X2500	11	7800
	DGE 036	2000X2500	15	11700
	DGE 2536	2500X2500	22	15600

This type of feeders are suitable for the materials smaller than 400 mm. Feeder is driven by means of two vibromotors.

	Type	Table Size (wxL)	Capacity (tph)	Drive (kw/prm)	Weight (kg)
	DVB.0612	600X1200	100-150	2X1,1/1000	550
	DVB.0815	800X1500	150-200	2X1,6/1000	750
	DVB.1020	1000X2000	200-270	2X2,2/1000	1100
	DVB.1220	1200X2000	250-350	2X3,0/1000	1350

DAL Micronize Screens DME, are designed for fine material screening down to 200 µm.These screens are mounted in a compact design with high capacity, and driven by two vibro – motors which rotates in opposite direction or drive-gear.

The sand dewatering reclaimer, is a machine which solves the problem of sand reclamation and rinsing.The machine is formed by a moulded tub 15° inclined, the inside of which is equipped with an archimedean screw started into rotation by a gear motor unit.

	Type	Capacity (tph)	Drum Diameter (mm)	Drum Width (mm)	Rotation Speed (rpm)	Torque (N.m)	Drive (KW)
	Single Bucket	2000	800	0,8~1,25	3	7800	2x7
		2500	800	0,8~1,25	3	9800	15
	Double Bucket	2000	800	0,8~1,25	3	14500	22,5
		2500	1000	0,8~1	4	16650	30
	Triple Bucket	2000	800	0,8~1,25	5	21700	45
		25000	1000	0,8~1	7,5	21700	45