Crushing-Conveying

CRUSHERS

Jav Crusher

The new single toggle primary jaw crushers have been manufactured to be reliable in even the most difficult working conditions. Extensive researches have resulted in designing a new crushing chamber with a slight catching angle.

Dal Technic Machinery - Crusher Type Feed Opening (mm) Flywheel Diameter Ø (mm) Flywheel Rotation (RPM) Drive (kw) Weight (kg)
FRN1600 1600X1350 2400 170 - 190 250- 315 90000
FRN1400 1400X1250 1900 180 - 220 160 - 200 53000
FRN1250 1250X1050 1600 180 - 220 132 - 160 46500
FRN1100 1100X900 1400 200 - 240 75 - 90 30000
FRN900 900X800 1300 230 - 260 55 - 75 19000
FRN750 750X550 1200 240 - 270 30 - 37 11000

Rup Primary Impact Crusher

Primary impact crushers are succesfully used to crush non–abrasive materials with high crushing ratio and high productivity.

Dal Technic Machinery - Rup Primary Impact Crusher Type Feed Opening (mm) Capacity (t/h) Rotor Speed (Rpm) Drive (kw) Weight (kg)
RUP65 650X700 80-145 545 75-90 8300
RUP85 850X1000 120-250 545 110-132 15000
RUP 110 1100X1000 160-320 380-450 160-200 28000
RUP130 1300X1450 280-510 380-450 250-400 35000
RUP170 1700X1450 580-790 380-450 355-500 58000
RUP200 2000X1450 740-1020 380-450 500-900 85000

Seconder / High Speed Impact Crusher

DAL RDS–RDM crushers are high capacity productive machineries designed for quarrying solutions.

RDM – RDS Properties
Dal Technic Machinery - Seconder / High Speed Impact Crusher Speciality Feed Size (mm) (Limestone) Feed Size (mm) (Basalt-Granite) Capacity (t/h) Drive (kw) Rotor Speed (rpm) Weight (kg)
RDM65 10–100 3–100 40–80 75–160 600–1100 9000
RDM65S 5–150 5–120 80–150 160–250 500–800 15000
RDS85 5–350 5–250 150–300 160–250 350–600 19000
RDM130 10–100 3–100 80–150 160–315 600–1100 13000
RDM130S 5–150 5–120 200–355 250–355 500–800 22000
RDS170 5–350 5–250 250–500 250-355 350–600 29000
RDS170S 5–350 5–250 300–750 355–500 350–600 34000

FEEDERS

Grizzly Feeder

Dal Technic Machinery - Grizzly Feeder These machines are used to feed primary jaw or impact crushers.The single or double grizzly sections allow to rough out the material, and separate the fine products from the pieces remaining over the grizzly which ensures the capacity increase of the crushers.

Belt Conveyor

Conveyor rubber in EP 125 or EP 160 quality, with 4 – 5 plies of chord, 10 – 12 mm thickness, endless and with certificate.

Dal Technic Machinery - Belt Conveyor Type Belt Size (mt) Drive (Kw) Belt Speed (mpm) Belt Angle (°)
500 5,0- 50 5,5 – 22 1,1 – 24 0 – 18
600 5,0- 50 5,5 – 37 1,1 – 24 0 – 18
700 5,0- 50 5,5 – 75 1,1 – 24 0 – 18
800 5,0- 50 5,5 – 75 1,1 – 24 0 – 18
1000 5,0- 90 7,5 – 75 1,1 – 24 0 – 18
1200 5,0- 90 7,5 – 75 1,1 – 24 0 – 18
1400 5,0- 90 11 – 132 1,1 – 24 0 – 18
1600 5,0- 90 11 – 250 1,1 – 24 0 – 18

Apron Feeder (Paletli)

RAL serie of apron feeders of DAL, are used for extra heavy duty applications in wide ranges. These machines are designed to feed primary jaw and impact crushers.

Dal Technic Machinery - Apron Feeder Type Dimensions (mmxmm) Drive (Kw) Capacity (tph) Speed (mpm)
RAL800 800x6000 4 100-150 3,2 - 8,2
RAL1000 1000x6000 5,5 150-320 3,2 – 8,2
RAL1200 1200x8000 11 210-590 3,8 – 7,5
RAL1500 1500x12000 22 270-850 2,5 – 6,3
RAL2000 2000x12000 45 340-1200 2,5 – 6,3

Push Feeder

RAL serie of push feeders of DAL, are used for extra heavy duty applications wide ranges.Proportional hydraulic system lets precise control for feeding.

Dal Technic Machinery - Push Feeder Type Table Size (mmxmm) Drive (Kw) Capacity (tph) Stroke (mpm)
VAG 800x2000 800X2000 3 50-180 50 – 250
VAG 1000X4000 1000X4000 7,5 100-210 50 – 250
VAG 1200X5000 1200X4000 15 170-350 100- 500
VAG 1500X6000 1500X5000 22 230-550 100- 500

SCREENS

Vibrating Screen

The movements is operated by a vibrator unit with agjustable eccentric counter weights placed on and outside the screen box.The steel alloy shaft runs on two self-aligning special roller bearings for vibrating operations.

Dal Technic Machinery - Vibrating Screen Type Level Size of Sieve (mm) Feed size (d/d) Drive (kw) Weight (kg) Rotor Speed (r.p.m)
DVE12302 2 1250X3500 150 7 2240 800-1000
DVE12303 3 1250X3500 150 7 2760 800-1000
DVE12304 4 1250X3500 150 11 3130 800-1000
DVE15402 2 1500X4500 150 15 4200 800-1000
DVE15403 3 1500X4500 150 15 4910 800-1000
DVE15404 4 1500X4500 150 15 5920 800-1000
DVE18502 2 1800X5000 150 15 5870 800-1000
DVE18503 3 1800X5000 150 18 7060 800-1000
DVE18504 4 1600X5000 150 18 8290 800-1000
DVE18602 2 1800X6000 150 18 11680 800-1000
DVE18603 3 1800X6000 150 22 16050 800-1000
DVE18604 4 1800X6000 150 22 18540 800-1000
DVE20602 2 2000X6000 150 22 11680 800-1000
DVE20603 3 2000X6000 150 30 16050 800-1000
DVE20604 4 2000X6000 150 30 18540 800-1000
DVE24602 2 2400X6000 150 30 11680 800-1000
DVE24603 3 2400X6000 150 37 16050 800-1000
DVE24604 4 2400X6000 150 37 18540 800-1000

Grizzly Screen

DAL Grizzly Screens DGE, are designed for screening applications with high capacity, high screening efficiency, ease of maintenance and mesh replacement and quality manufacturing and workmanskip.

Dal Technic Machinery - Grizzly Screen Type Screen Size (mmxmm) Drive (kw) Weight (kg)
DGE 1036 1000X2500 7,5 4500
DGE 1536 1500X2500 11 7800
DGE 036 2000X2500 15 11700
DGE 2536 2500X2500 22 15600

Vibro Feeder

This type of feeders are suitable for the materials smaller than 400 mm. Feeder is driven by means of two vibromotors.

Dal Technic Machinery - Vibro Feeder Type Table Size (wxL) Capacity (tph) Drive (kw/prm) Weight (kg)
DVB.0612 600X1200 100-150 2X1,1/1000 550
DVB.0815 800X1500 150-200 2X1,6/1000 750
DVB.1020 1000X2000 200-270 2X2,2/1000 1100
DVB.1220 1200X2000 250-350 2X3,0/1000 1350

Micronize Screens

DAL Micronize Screens DME, are designed for fine material screening down to 200 µm.These screens are mounted in a compact design with high capacity, and driven by two vibro – motors which rotates in opposite direction or drive-gear.

Type General Size (mm x mm) Screen Level
DME05xx 500X2400 2 – 6
DME10XX 1000X2400 2 – 6
DME15XX 1500X2400 2 – 6
DME20XX 2000X2400 2 – 6
DME25XX 2500X2400 2 – 6
DME30XX 3000X2400 2 – 6

Sand Classificator

The sand dewatering reclaimer, is a machine which solves the problem of sand reclamation and rinsing.The machine is formed by a moulded tub 15° inclined, the inside of which is equipped with an archimedean screw started into rotation by a gear motor unit.

Dal Technic Machinery - Sand Classificator Type Capacity (tph) Drum Diameter (mm) Drum Width (mm) Rotation Speed (rpm) Torque (N.m) Drive (KW)
Single Bucket 2000 800 0,8~1,25 3 7800 2x7
2500 800 0,8~1,25 3 9800 15
Double Bucket 2000 800 0,8~1,25 3 14500 22,5
2500 1000 0,8~1 4 16650 30
Triple Bucket 2000 800 0,8~1,25 5 21700 45
25000 1000 0,8~1 7,5 21700 45